Our offer includes:
Klinger newly patented product. The world’s first sealing material reinforced only with HNBR.
The product is a result of research aimed at manufacturing non-asbestos sealing product reinforced with fibre whose parameters are similar to KLINGERite, which would at the same time meet the contemporary tightness and environmental requirements.
Exceptional flexibility for continued use at high temperatures, and a broad chemical resistance range.
Recommended for use in installations and systems that involve water, vapour, oil, gas, fuel, alcohol, saline solutions, weak acids, hydrocarbons, lubricants and coolants
Standard dimensions: 1000x1500mm, 2000x1500mm; thickness: 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm.
High pressure non-asbestos sealing products
SIL C-4106, base: synthetic fibres and cork with NBR binder
SIL C-4300, base: aramid fibre with NBR binder
SIL C-4400, base: aramid fibre with NBR binder
SIL C-4408, base: aramid fibre with NBR binder; reinforced with steel mesh
SIL C-4409, base: synthetic fibres with NBR binder; reinforced with expanded metal mesh
SIL C-4430, base: mixture of synthetic and glass fibre with NBR binder; fire-proof
SIL C-4500, base: carbon fibre with high-temperature proof additives, with NBR binder; fire-proof
SIL C-4509, base: carbon fibres with high-temperature proof additives, with NBR binder; High-Tech material: resistance to extremely high temperatures and pressures
SIL C-6307, base: aramid fibres with NR and SBR binders; self-sealing by expansion under the influence of oil
SIL C-8200, base: glass fibre with acid-resistant elastomers
Our offer includes universal and specialist sealing products for various applications.
Agents: water, vapour, oils, hydrocarbons, gases, saline solutions, fuels, alcohols, acids, lubricants, etc.
Standard dimensions: 1000x1500mm, 2000x1500mm, thickness: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm.
KLINGERtop-sil-ML1, base: synthetic fibres with outer HNBR and inner NBR binder; multilayer structure
Vapour resistance up to 300ºC. Flexibility retained over a long period of use: transmission of changing loads. High strength and stability against heavy loads
Agents: oils, vapour, gases, saline solutions, fuels, lubricants, alcohol, weak organic and mineral acids, hydrocarbons, coolants
Standard dimensions: 2000x1500mm [1000x1500mm, 1000mmx4000mm], thickness: 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm
Retains the advantages of PTFE, and at the same time reduces largely the flow which is typical of this material. The flow for KLINGERtop-chem-2000 is only 1.6% for surface load of 50 MPa and temperature 200°C
KLINGERtop-chem-2000, base: PTFE with a fire safe certificate
KLINGERtop-chem-2003, base: PTFE
KLINGERtop-chem-2005, base: PTFE
KLINGERtop-chem-2006, base: PTFE;
Sealing products for food, chemical, petrochemical, and pharmaceutical industry applications Resistant to acids and lyes; leakproofness in conformity with the TA-Luft standards
Standard dimensions: 1500x1500mm, thickness: 1.5mm, 2.0mm, 3.0mm
Graphite foil sealing sheets
Homogenous graphite sheets: Klingergraphite sheets;
Self-adhesive foil: Klingergraphite Foil SMB;
Reinforced graphite sheet: Klingergraphite Laminate SLS; Klingergraphite Laminate PSM;
Klingergraphite Laminate PSE; Klingergraphite Laminate PDM;
Klingergraphite Laminate SDS;
Temperature -200º to 450ºC [higher point in neutral atmosphere]; resistant to temperature changes; perfectly gas- and liquid-proof; very high chemical resistance; health-friendly materials
High pressure non-asbestos sealing products – a less expensive alternative to KLINGERSIL
Maxil AF, base: aramid fibres with NBR binder;
Maxil SF, base: synthetic fibres with NBR binder;
Maxil CARB, base: carbon fibres reinforced with steel mesh, with NBR binder;
Maxil 1000R, base: carbon fibres reinforced with steel mesh, with NBR binder;
Maxil ACID, base: aramid fibres with synthetic elastomer binder
Agents: oils, water, gases, weak acids and lyes; for selected materials – also vapour and hydrocarbons
Standard dimensions: 1000x1500mm, 2000x1500mm; thickness: 0,5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm.
Kempchen’s original RivaTherm-Super y graphite sheets
Base: top purity homogenous graphite, used even for nuclear applications. High durability guaranteed by the patented technology for glueless joining of graphite with the gasket’s sheet metal
Standard dimensions: 1000x1000mm, 600x1500mm; thickness: 1.0mm, 1.5mm, 2.0mm, 3.0mm
For details see: www.klinger.pl
Metaloplastic and metal gaskets that conform to DIN standards; Kempchen’s original product
Our offer includes the following sealing products:
flat metal gaskets, corrugated; Wekas jacketed gaskets; Weckapack jacketed gaskets; Spiroflex spiral-wound gaskets; comb-shaped gaskets; Convex; metal jacket gaskets; PTFE jacket gaskets; round wire gaskets; ring-joint gaskets
Metaloplastic and metal gaskets that conform to ANSI and BS standards; original product of KLINGER Limited, Bradford, UK
KLINGERmaxiflex – spiral-wound non-asbestos gaskets, with or without location rings. Standard spirals: 316L, though other types are available to order
R – spirals without rings;
CR – spirals with outer rings;
RIR – spirals with inner rings;
CRIR – spirals with inner and outer rings.
KLINGER – soft gaskets with metal jackets (iron, steel, acid resistant steel, etc.)
Filler: graphite, PTFE, KLINGERSIL, non-asbestos packing
100 – soft filler and double jacket;
101 – soft filler and single jacket, partly closed;
102 – soft filler and single jacket;
103 – soft filler and single jacket, open outer edge;
104 – single corrugated sheet metal, no filler;
105 – soft filler and single corrugated jacket.
KLINGERmaxiprofile – serrated gaskets: steel comb-shaped ring [304/316/321 or other] sealing clamps [graphite, PTFE, KLINGERSIL].
LA1 – flat gaskets with lead rings;
LA2 – flat gaskets without lead rings;
LA3 – flat gaskets with movable lead rings;
CA1 – biconvex gaskets with lead rings;
CA2 – biconvex gaskets biconvex without lead rings;
CA3 – biconvex gaskets with movable lead rings.
KLINGER – steel RING JOINTS for grooved flange couplings that conform to API, BS, MSS SP. R
Material: iron, carbon steel, alloy steel, acid resistant steel 304, 316, 321, 347; titanium, aluminium, copper, incoloy and other materials to order
Available Types: R oval, R round, RX, BX
For details see: www.klinger.pl
Flat gaskets that conform to DIN and ANSI ; various shapes; also gaskets with metal ferrules or PTFE
Material: KLINGERSIL, KLINGERgraphite Laminate, KLINGERtop-chem, KLINGERtop-graph, MAXIL, SIGRAFLEX
Graphite rings with all sections; also rings with metal ferrules or PTFE coating
KLINGERsealex: self-adhesive tape from upend-forged PTFE, thickness: 1.5-8.0mm;
KLINGERpackings: packing cords;
Material: graphite, PTFE, polyamide, aramid, glass, acrylic; additional items: nickel fibre, chromium fibre, graphite, PTFE, silicone lubricant
For details see: www.klinger.pl